| |
|
|
| |
|
MLS130 - Linear Displacement Sensor |
|
|
| |
| |
|
Responding to customer demand, Penny+Giles has developed this competitively priced linear position
sensor for the motorsport industry.
Available in eight stroke lengths from 25 to 200mm, the
MLS130 is sealed to IP66, and is supplied ready fitted with
a DR25 sheathed, 3-core cable integrally moulded into the
sensor. This eliminates the need for users to fit 'heat-shrink'
over-sleeving more commonly required on other sensors.
A choice of three mountings are available, including M5 metal
rod-end bearings at both ends of the sensor. An
auxiliary
protective sleeve can also be supplied that allows the sensor
to endure multiple race use in all weather conditions.
The MLS130 uses the proven hybrid track technology, which
provides virtually infinite resolution and a long track life. This
high reliability absolute position sensor reduces the need for
regular maintenance and re-calibration, with no loss of
positioninformation in the event of a system power loss. |
Key Features |
| • Compact body to stroke length |
| • Choice of mountings, including metal rod-ends |
| • Sealed to IP66 with optional protective sleeve |
| • Integrally moulded rear cable with 'DR25' |
| • sheath |
|
| |
|
• Rapid delivery |
|
| • CE approved |
|
| |
|
| |
 |
| |
| |
 |
| |
|
|
| |
|
|
| |
|
|
| |
| |
SLH100 - Hall Effect Contactless Linear Sensor |
|
|
| |
| |
|
The Penny+Giles Hall Effect Linear Sensor - SLH100 -
has been specifically designed to provide precision
cost-effective position sensing, using the proven
contactless Hall effect principle.
The sensing system comprises two parts: the sensor and t
he magnetic activator.
The sensor is a fully encapsulated electronic device and
is intended to compete with sealed potentiometers and
inductive sensors. The sensor can be used for a variety
of automotive, industrial vehicle, marine and control
applications.
The durable design and absence of mechanical linkages
makes this sensor attractive for use in harsh environments
- where particles, moisture, temperature and vibration
can be present.
Robust, maintenance-free and easy to fit, the Penny+Giles
Hall Effect Linear Sensor represents a cost-effective solution
for demanding linear position sensing applications. |
Key Features |
|
| • 28mm measuring range |
| • 5V or 8-30Vdc supply |
| • 0.5 to 4.5Vdc output |
| • -40 to +125°C working range |
| • Features an on-board micro controller that |
| |
|
• linearises the sensor output |
| • Robust, sealed housing |
| • Suitable for high dither vibration conditions |
| • Virtually infinite life |
|
| |
| |
|
| |
|
|
| |
|
|
| |
|
|
| |
SLS095 - Linear Displacement Sensor |
|
| |
|
The SLS095 is a range of linear position sensors
designed to provide maximum performance benefits
within an extremely compact, lightweight package in
stroke lengths from 10 to 100mm.
Using the proven benefits of Hybrid Track Technology and
including a number of unique design features, the SLS095 is
ideally suited to high volume OEM manufacturers, where
high performance and reliability with competitive pricing and
rapid despatch has paramount importance.
The miniature size of this new sensor makes it ideal for
applications in robotics, animatronics, medical equipment
and motorsport data acquisition. |
Key Features |
|
| • Short body to stroke length |
| • Sealing to IP66 and corrosion resistant |
| • rod end bearings |
| • Cable assembly integrally moulded |
| • Significantly reduced weight |
| |
|
• Rapid delivery |
| • CE approved |
| • Replacement for Penny+Giles' model |
| • HLP095 linear potentiometer |
|
| |
| |
|
| |
|
|
| |
| |
SLS130 - Linear Displacement Sensor |
|
| |
|
The SLS130 is a range of linear position sensors
designed to provide maximum performance benefits
within an extremely compact, lightweight package
in stroke lengths from 25 to 200mm.
Using the proven benefits of Hybrid Track Technology and
including a number of unique design features, the SLS130
is ideally suited to high volume OEM manufacturers, where
high performance and reliability with competitive pricing and
rapid despatch has paramount importance. |
Key Features |
|
| • Short body to stroke length |
| • Sealing to IP66 and corrosion resistant |
| • rod end bearings |
| • Cable assembly integrally moulded |
| • Significantly reduced weight |
| |
|
• Rapid delivery |
| • CE approved |
| • Replacement for Penny+Giles' model |
| • HLP129 linear potentiometer |
|
| |
| |
|
| |
|
|
| |
| |
SLS190 - Linear Displacement Sensor |
|
| |
|
The SLS190 is a range of linear position sensors
designed to provide maximum performance benefits
within an extremely compact size, in stroke lengths
from 25 to 350mm.
Using the proven benefits of Hybrid Track Technology and
including a number of unique design features, the SLS190
is ideally suited to high volume OEM manufacturers, where
high performance and reliability with competitive pricing
and rapid despatch has paramount importance. |
Key Features |
|
| • Short body to stroke length |
| • Sealing to IP66 and corrosion resistant |
| • rod end bearings |
| • Cable assembly integrally moulded |
| • Reduced weight |
| |
|
• Rapid delivery |
| • CE approved |
| • Replacement for Penny+Giles' model |
| • HLP190/SA linear potentiometer |
|
| |
| |
|
| |
|
|
| |
SLS220 - Linear Displacement Sensor |
|
| |
|
The SLS220 is a linear position sensor available
in stroke lengths of 10 and 20mm, with a spring
loaded operating shaft.
With a mounting flange to allow easy installation and
housed within a high strength Nylatron® housing,
providing good chemical resistance and low weight.
Suited to OEM and process monitoring applications,
this new sensor replaces the obsolete HLP220 model. |
Key Features |
| • Spring loaded shaft with 10 and 20mm stroke |
| • range |
| • Cable assembly integrally moulded |
| • Rapid delivery |
| • CE approved |
|
| |
|
• Replacement for Penny+Giles' |
| • model HLP220 linear |
|
| • potentiometer |
|
|
| |
| |
SLS320 - Linear Displacement Sensor |
|
| |
|
The SLS320 is a range of linear position sensors
designed to provide stroke lengths from 250 to
1600mm in a compact, lightweight, easy to use
design.
Using the proven benefits of Hybrid Track Technology
and including a number of unique design features, the
SLS320 is ideally suited to high volume OEM
manufacturers, where high performance and reliability
with competitive pricing and rapid despatch has
paramount importance. |
Key Features |
|
| • Shorter body to stroke length |
| • Sealing to IP66 and corrosion resistant rod |
| • end bearings |
| • Integrally moulded M12 industry standard |
| • connector |
| • Significantly reduced weight |
| • Rapid delivery |
| • CE approved |
|
| • Interchangeable with linear |
| • Penny+Giles' model HLP350 |
|
| • potentiometers |
|
|
| |
| |
SLT190 - Contactless Linear Position Transducer |
|
| |
|
The SLT190 linear position transducer is
designed to provide reliable, fit-and-forget
position sensing (up to 500mm) within a
compact transducer size for the most
arduous operating environments.
The SLT190 has been designed with 21st century
applications in mind. The transducer can witstand
operating temperatures from -40 to +150°C and
has been tested to withstand shocks to 10,000g.
With EMC Immunity of 100V/m, this transducer is
ready for the harshest of applications.
To minimise the transducer size and the impact on
the overall system, we provide separate signal
conditioning electronics (EICT or EICTM) housed
in rugged IP66 or IP68 rated enclosures. The electronics
module can be located up to 10m away from the
transducer, well away from any hostile conditions
(vibration, mechanical impact, temperature) that the
position transducer may encounter during operation.
The result is a more reliable transducer solution,
easily installed and adjusted and more flexible in
the choice of outputs available - including voltage,
current and digital PWM. |
Key Features |
|
| • Contactless sensing with inductive coil |
| • technology |
| • Small transducer body length to stroke ratio |
| • 25mm to 500mm stroke range |
| • Infinite resolution |
| • Absolute measurement |
| • Rugged stainless steel construction, resistant |
| • to shock and vibration |
|
| • Operates from -40 to +150°C |
|
| • CE approved |
|
| • Rapid despatch of any length |
| |
|
|
|
| |
| |
VPT210 - Valve Position Transducer |
|
| |
|
Penny+Giles have introduced a new capability
using the latest Hall effect sensor technology,
which has been developed to meet the demands
of OEM valve manufacturers and machine hydraulics.
The VPT210 spool feedback sensor has been designed
for the hydraulic spool valve market - particularly for
new generation hydraulics fitted to on- and
off-highway vehicles. New machine safety directives
require a cost effective alternative to costly LVDT and
LVIT inductive technologies that require additional
control electronics fitted in separate enclosures.
The VPT210 is a fully integrated transducer package
that includes a non-contact position sensor in a
pressure sealed enclosure, with on-board signal
conditioning - eliminating the need for additional
control cards and separate enclosures. |
Key Features |
|
| • Non-contact Hall effect technology |
| • Suitable for measurement range of ±3mm |
| • to ±11mm |
| • Single channel output (dual channel OEM option) |
| • On-board signal conditioning |
| • Supply voltage 6.5 to 34Vdc |
| • Outputs 0.5 to 4.5Vdc or PWM |
| • Burst pressure rating 600 Bar (8400psi) |
| • Working pressure rating 420 Bar (5880psi) |
| |
|
| |
| |
|
|
| |
|
|
| |
|
|
| |
Page 1 2 |
|
| |
|
|
| |
Back to Linear Sensors Products |
|
| |
|
|
