Loading
 
  Positioners Back to Products Page  
     
 

RD1A - Positioning unit
 

RD1A - Positioning unit


 • Integrated positioning unit • Housing Dimensions 59 x 112 x 125 mm  
• High performance brushless motor • Shaft Diameter 14 mm  
• RS232 service interface for easy setup • Speed 240 rpm max.
• Real absolute multi turn encoder • Torque 5 Nm
• Additional jog +/- buttons for easy • Power Supply 24 Vdc ±10%
• calibration • Interface Profibus-DP, CANopen, Modbus
    RTU (RS485)
• Encoder Absolute
     
   
 
 
 

RD12A - Real absolute multi turn encoder
 

RD12A - Real absolute multi turn encoder


 • Integrated positioning unit • Housing Dimensions 59 x 142 x 125 mm  
• High performance brushless motor • Shaft Diameter 14 mm  
• RS232 service interface for easy set up • Speed 240 rpm max.
• General purpose I/O • Torque 5 Nm
• Additional jog +/- buttons for easy • Power Supply 24 Vdc ±10%
• calibration • Interface Profibus-DP, CANopen, Modbus
    RTU (RS485)
• Encoder Absolute
     
   
 
 
 
 

RD1 - Constant Torque up to 5Nm, Hollow Shaft
 
 
 

RD1 - Constant Torque up to 5Nm, Hollow Shaft

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 58 x 124 x 122mm
• Position controller & Fieldbus interface • Shaft Size Ø14mm
• Easy fixing with antirotation pin. • Speed 240rpm Max
• Jog+/Jog- push buttons on the rear panel. • Torque - Starting 10Nm Max
• Blind hollow shaft. • Torque - Constant 5Nm Max
• Diagnostics LED and function buttons. • Interface RS485, Profibus-DP, CANopen
  • Power Supply +24VDC
    • Encoder Absolute
 
 
 
 
     
 
 

RD11 - Constant Torque up to 5Nm, Solid Shaft
 
 
 

RD11 - Constant Torque up to 5Nm, Solid Shaft

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 58 x 124 x 122mm
• Position controller & Fieldbus interface • Shaft Diameter Ø14mm
• Easy fixing with antirotation pin. • Speed 240rpm Max
• Jog+/Jog- push buttons on the rear panel. • Torque - Starting 10Nm Max
• Solid Shaft with Keyway. • Torque - Constant 5Nm Max
• Diagnostics LED and function buttons. • Interface RS485, Profibus-DP, CANopen
  • Power Supply +24VDC
  • Encoder Absolute
 
 
 
 
     
 
 

RD12 - Constant Torque up to 5Nm, with Integrated Motor Brake
 
 
 

RD12 - Constant Torque up to 5Nm, with Integrated Motor Brake

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 58 x 124 x 122mm
• Position controller & Fieldbus interface • Shaft Diameter Ø14mm
• Easy fixing with antirotation pin. • Speed 240rpm Max
• Jog+/Jog- push buttons on the rear panel. • Torque - Starting 10Nm Max
• Blind hollow shaft with motor brake. • Torque - Constant 5Nm Max
• Diagnostics LED and function buttons. • Interface RS485, Profibus-DP, CANopen
    • Power Supply +24VDC
• Encoder Absolute
 
 
 
 
     
 
 

RD2 - Constant Torque up to 1.6Nm, Hollow Shaft
 
 
 

RD2 - Constant Torque up to 1.6Nm, Hollow Shaft

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 56 x 56 x 125mm
• Position controller & Fieldbus interface • Shaft Diameter Ø14mm
• Easy fixing with antirotation pin. • Speed 110rpm Max
• Jog+/Jog- push buttons on the rear • Torque - Starting 3Nm Max
• panel. • Torque - Constant 1.6Nm Max
• Blind hollow shaft. • Interface RS485, Profibus-DP, CANopen
  • Diagnostics LED and function buttons. • Encoder +24VDC
  • Protection Absolute
• Output External Brake Control  
 
 
 
 
     
 
 

RD22 - Constant Torque up to 1.6Nm with Integrated Motor Brake
 
 
 

RD22 - Constant Torque up to 1.6Nm with Integrated Motor Brake

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 56 x 56 x 125mm
•Position controller & Fieldbus interface • Shaft Diameter Ø14mm
• Easy fixing with antirotation pin. • Speed 110rpm Max
• Jog+/Jog- push buttons on the rear • Torque - Starting 3Nm Max
• panel. • Torque - Constant 1.6Nm Max
• Diagnostics LED and function buttons. • Interface RS485, Profibus-DP, CANopen
    • Power Supply +24VDC
  • Encoder Absolute
     
 
 
 
 
     
 
 

RD3 - Constant Torque up to 5Nm, Hollow Shaft
 
 
 

RD3 - Constant Torque up to 5Nm, Hollow Shaft

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 56 x 75 x 158mm  
• Position controller & Fieldbus interface • Shaft Diameter Ø14mm
• Easy fixing with antirotation pin. • Speed 240rpm Max
• Jog+/Jog- push buttons on the rear • Torque - Starting 10Nm Max
• panel. • Torque - Constant 5Nm Max
• Blind hollow shaft. • Interface RS485, Profibus-DP, CANopen
  • Diagnostics LED and function buttons. • Power Supply +24VDC
  • Encoder Absolute
   
 
 
 
 
     
 
 

RD5 • RD52 - Constant Torque up to 5Nm, Hollow Shaft
 
 
 

RD5 • RD52 - Constant Torque up to 5Nm, Hollow Shaft

 • Integrated Gear-motor, Drive, Encoder, • Housing Dimensions 48 x 88 x 125mm  
• Position controller & Fieldbus interface • Shaft Diameter Ø14mm  
• Easy fixing with antirotation pin. • Speed 60rpm Max
• Jog+/Jog- push buttons on the rear • Torque - Starting 12Nm Max
• panel. • Torque - Constant 5Nm Max  
• Blind hollow shaft. • Interface CANopen (DS301)
  • Diagnostics LED and function buttons. • Power Supply +24VDC
• RD52 with integrated motor brake. • Encoder Absolute
   
   
 
 
 
 
     
 

RD4 - Positioning unit

 

RD4 - Positioning unit


 • Up to 24 Nm starting torque • Housing Dimensions 65 x 153 x 160 mm  
• Real 20 bit multiturn encoder • Shaft Diameter 20 mm  
• Closed loop control • Speed 94 rpm max.
• Woodworking, packaging, bottling & • Torque 15 Nm max.
•labeling machines • Power Supply 24 Vdc ±10%
  • Interface Profibus-DP, CANopen
    (DS301), Modbus RTU (RS485)
• Encoder Absolute
     
   
 
 
  Back to Products Page