Displays & Position Controllers

		Back to Products Page
Displays & Position Controllers

LD300 - Position display for incremental encoders

• Multi-function display for incremental	• Display	Counter/position, tachometer, time display, stop watch, transition speed, linearization of analogue output, scaling factor
• encoders
• Position display, tachometer, start/stop	• Display Mode	LED 6 digits
• speed display, event counter	• Dimensions	96 x 48 x 141 mm
• Digital or analogue outputs	• Input	PNP o NPN (HTL); TTL
• Multivoltage supply 24Vdc, 115/230Vac	• Counting	100 kHz max. (counter mode);
• LD300 display	• Frequency	25 KHz max. (other operating modes)
• LD301 display with analogue output	• Power Supply	24 Vdc ± 20%, 115/230 Vac
• LD302 preset display with digital outputs		24 Vdc ± 20%, 24/42 Vac
• LD303 display with serial interface	• Interface	RS232 / RS485 (LD303)
	• Outputs	LD301: analogue 0/4-20 mA, 0± 10V;
		LD302: digital PNP 2 x 30V - 150 mA

LD200 - Single Axis LED Position Display

• Universal position display	• Housing Dimensions	98 x 48 x 69mm
• SSI, quadrature and Sine-Cosine input .	• Display	LED 8 Digit
• Easy parameter setup.	• Display Mode	Linear, angular, mm/inch
• Large display range with 8 digits.	• Input	AB0, 1Vpp, SSI, Magnetic
• Linear & angular display functions.		sensor
• 500 kHz high speed counter.	• Counting Frequency	500kHz Max
• RS232 interface.	• Interface	RS232
	• Power Supply	+24VDC
	• Outputs	Open collector, 24V with
		optocouplers, Imax=23mA

MC150 - Incremental Encoder Display

• Programmable position display	• Housing Dimensions	96 x 72 x 63mm
• 24VDC/VAC, 115VAC or 240VAC.	• Display	LED 6 Digit
• Counting frequency up to 1 MHz.	• Display Mode	Linear, angular
• 2 output circuits.	• Input	AB0, /AB0, Push-Pull, Line
• Power supply for encoder.		Driver
• Relay output option.	• Counting Frequency	330kHz Max
	• Interface	RS232
	• Power Supply	+24VDC
	• Outputs	2 x PNP o.c, 24V @ 600mA
		2 x Relays

MC111 - Low Cost Incremental Encoder Display

MC221 - 2 Axes Encoder Display

PV1- 4 Axes Display & Position Controller

• For lathes and milling machines	• Housing Dimensions	280 x 110 x 35mm
• High speed counter for high	• Display	LCD
• resolution linear scales and encoders.	• Display Mode	Linear
• Numeric keypad.	• Input	4 x AB0, AB0/AB0
• LCD Display.	• Counting Frequency	2MHz Max
• Panel mount version.	• Interface (Optional)	RS-232
	• Power Supply	+24VDC
	• Outputs	12 x PNP o.c, 24V @ 600mA
		4 x ±10VDC

PS611 - Single or Dual Axis Position Controller

• Easy and intuitive programming.	• Housing Dimensions	120 x 154 x 34mm
• Program memory for 3000 program steps.	• Display	LCD
• Numeric and function keypad.	• Display Mode	Position, parameters
• Incremental encoder input.	• Input	24V, AB, 15 kHz Max
• 8 digital outputs for positioning.		8 digital inputs, 500 Hz Max
	• Counting Frequency	15kHz
	• Interface (Optional)	RS-232
	• Power Supply	+24VDC
	• Outputs	8 digital, 24V @ 750 mA Max.

TE601 - Communication Terminal for RD Positioning Units

• Allows communication and parameter	• Housing Dimensions	120 x 154 x 34mm
• setting via CANbus.	• Display	LCD
• Easy parameter setup.	• Display Mode	Positioner Status
• Connects up to 4 RD units.	• Input	CANOpen
• RS232 interface.	• Interface (Optional)	RS232
	• Power Supply	+24VDC
	• Outputs	CANOpen (6 Slaves Max)