Back to Digital Meters
 
 
 
  PICA Series
     
 
PICA-100-F
PICA-100-F
Frequency or Pulse


PICA100-F
, instrument of the KOSMOS series, size 1/32 DIN  with 4 digits LED red  8 mm high, designed for  measuringfrequencies, velocities in r.p.m. or lineal totally programmable.
Supply  excitation for the captor,  selectable via  programming

Accepts the connection of most Standard sensor: PicK-up Magnetic, Namur, PNP, NPN, switch, as well as the possibility of measuring frequencies from signals in the range of 10 to 600 V ac.
Its two mounted relays allows this instrument not only to measure but also to be able to control, regulate and detect alarms for the mentioned signals.

Thanks to its communication option RS4P (RS485) it can be integrated within a measurement system and is able to provide information via its protocols ASCII, ISO 1745 or MODBUS-RTU.
Incorporates three keys located on the front bottom for the configuration of all parameters.

Its brightness level is programmable with 4 levels in order to adapt it to the environment where it works. Registers the minimum and maximum process value since its commissioning or resetting. 

The output options are isolated from the input and the power supply.

 
     
     
   
 
PICA-100-P
PICA-100-P
Process


PICA100-P
, instrument of the KOSMOS series, size 1/32 DIN  with 4 digits LED red  8 mm high, designed for  measuring  process signals in range from 0 to 10 V, 0 to 20 mA, 4 to 20 mA  with power supply for the transducer incorporated, easily scalable in engineering units, via keyboard or field signal.
Incorporates others inputs, from 0 to 60 Vdc that allows voltages measurements like batteries of 12, 24 or 48 V and from 0 to 100 mV adequate for connection with Shunts of 50, 60 or 100 mV that allows measurements of tensions up to ± 2000 A. Its two supply ranges makes it useful for industrial applications like installations with batteries. For this reason, it is a very useful equipment for nautical applications especially for measurement and control of batteries or tanks of irregular shape thanks to the linearization of ramps option incorporated on this instrument.
Its two mounted relays allows this instrument not only to measure but also to be able to control, regulate and detect alarms for the mentioned signals.

Tanks to its communication option RS4P (RS485) it can be integrated within a        measurement system and is able to provide information via its MODBUS-RTU protocol, and can be totally configured by PC with a free el software available in www.ditel.es

Incorporates three keys located on the font bottom for the configuration of all the parameters.
Its brightness level is programmable with 4 levels in order to adapt it to the environment where it works. Registers the minimum and maximum process value since its commissioning or resetting. Offers the possibility to make a tare (display value absorption) that can be locked out at any time.
The output options are isolated from the input and the power supply.

 
     
     
 
   
 
PICA-40-LP
PICA-40-LP
4-20mA Loop Powered


Panel instrument Loop powered (active loop) 

INDICATOR FOR:

PROCESS (4-20 mA).

Display range –1999 to 9999, programmable decimal point.
Keys situated below the display.

   
 
 
PICA-40-ADC
PICA-40-ADC
DC Current using External Shunt


INDICATOR FOR DC MEASUREMENTS USING EXTERNAL SHUNT 
48 x 24 mm front panel Length 40 mm
• Designed for a specific nautical field application: measurement of batteries charge-discharge current 
• Current measurement using a shunt connected to the battery negative terminal.
• Type of SHUNT selected is programmable (50/ 60/ 100 mV)

• Programmable scale in the range ±199.9 or ±1999 A
• Display starts to blink when exceeding the 25 % of the scale in the
case of discharge indication.
• 3 keys Keyboard located below the display.

 
 
PICA-40-VDC
PICA-40-VDC
DC Current using External Shunt


ININDICATOR FOR DC MEASUREMENT IN THE RANGE OF: 8 to 30 VDC
• 48 x 24 mm front panel Length 40 mm
• No auxiliary supply needed, self-powered from the voltage to measure
• Designed for a specific nautical field application: measurement of batteries voltage


 
 
PICA-E 
PICA-E 
Electrical Variables


Panel instrument for volts and amps measurement in DC or AC, fully programmable.
INDICATOR FOR:

• VOLTS AC/DC ranges 100 V and 600 V
• AMPS AC/DC ranges 1 A and 5 A
48x24 mm front
Programmable decimal point.
Keys situated below the display.


 
 
PICA-F
PICA-F
Electrical Variables


Panel instrument for measuring frequencies, velocities in r.p.m. or lineal, totally programmable by keyboard.
Display range from 0 ÷ 9999, decimal point position programmable.

Keyboard composed of three keys located on the bottom of display. 
Accepts the connection of most Standard sensor: PicK-up Magnetic, Namur , PNP, NPN, switch, as well as the possibility of measuring frequencies from signals in the range of 10 to 600 V ac. E.g. the frequency of main voltage supply. 

Frequency ranges: 99,99 Hz, 999,9 Hz and 9999 Hz 
Tachometer in mode TAC programming only the pulses per revolution or in mode Rate programming the relationship between Frequency / display (in desired engineering units)


 
 
PICA-P
PICA-P
Process


Panel instrument for volts, mA and mV measurement in DC, fully programmable.
Display range –1999 to 9999, programmable decimal point.
INDICATOR FOR:
• PROCESS (±0-10 V, ±20 mA).
• VOLTS DC ±(200.0 V y 20.00 V).
• AMPERES DC (External Shunt).
• mV (±100 mV).
Keys situated below the display.


 
 
PICA-T
PICA-T
Temperature


Panel meter temperature measuring in ºC or ºF with Pt100, thermocouple J, K or T selectable by programming.
INDICATOR FOR TEMPERATURE:
• Pt100
• Thermocouple J, K, T
48x24 mm front 
Indication in ºC or 0.1 ºC for Pt 100 program selectable
Three keys keyboard situated on the bottom of the display.


 
 
Back to Digital Meters