Live Chat Support Software
 
     
     
     
 
 
       
       
                     
       
 
Back to Linear Position Sensors
 
Page 1 2
 
  Linear Position Sensors
     
 
 
AF111

AF111
LVDT Displacement Transducer

This LVDT displacement transducer is suitable for clamp mounting, and has a threaded, unguided core assembly to simplify installation.

For optimum performance, we recommend the use of the purpose designed signal conditioning modules to operate this LVDT:-
• UCM - Universal Conditioning Module, with IP68 protected metal enclosure.
• SCM100 - DIN Rail mounting

The design of the AF111 LVDT displacement transducer has evolved from technology and experience gained in over 30 years in the bespoke aerospace / military sensor market, where performance and reliability under extreme operating conditions are paramount. The transducer coil has been specifically designed to reduce overall transducer length and to enable high accuracy ratiometric operation, as well as being able to operate in the "Differential Output" configuration.

Suited to numerous industrial applications such as vehicle research, test rigs and OEM machinery.  

Key Features
• Small transducer body length to stroke ratio
• Temperature error less than 35ppm/°C
• Welded stainless steel construction, sealed to IP66
• Absolute measurement
• Infinite resolution

 
 
 

AF145

AF145
LVDT Displacement Transducer

This LVDT displacement transducer is mounted by self-aligning rod end bearings, and the outer sliding sleeve protects the movable core whilst enhancing the rigidity of the transducer during operation.

For optimum performance, we recommend the use of the purpose designed signal conditioning modules to operate this LVDT:-
• UCM - Universal Conditioning Module, with IP68 protected metal enclosure.
• SCM100 - DIN Rail mounting

The design of the AF145 LVDT displacement transducer has evolved from technology and experience gained in over 30 years in the bespoke aerospace / military sensor market, where performance and reliability under extreme operating conditions are paramount. The transducer coil has been specifically designed to reduce overall transducer length and to enable high accuracy ratiometric operation, as well as being able to operate in the "Differential Output" configuration.

Suited to harsh automotive and industrial environments.  

Key Features
• Small transducer body length to stroke ratio
• Temperature error less than 35ppm/°C
• Welded stainless steel construction, sealed to IP66
• Absolute measurement
• Infinite resolution

 
 

HLP190FS(BS)

HLP190FS(BS)
Spring Loaded Linear Potentiometer

The HLP190 range of hybrid linear potentiometers provides the facility for single or dual electrical output with a body diameter of only 19mm.

Stroke lengths are from 25mm to 150mm, with a choice of body clamp (BS) or flange (FS) mounting. This model is supplied with a spring loaded shaft, biased to the fully extended position.

Suited to a wide range of industrial applications for medium stroke length requirements.      

All other models in the HLP190 series (HLP190/SA, HLP190/BC and HLP190/FL models) have been replaced by the SLS190 range.

Key Features
• Stroke lengths from 25 to 150mm
• 19mm body diameter
• Spring loaded shaft with ball anvil fitting
• Flange [FS] or Body clamp [BS] mounting
• Virtually Infinite resolution
• Single or dual track option

 
 
ICS100

ICS100
In-Cylinder Linear Displacement Sensor

Designed specifically for use in hydraulic and pneumatic actuator applications, where the sensor is fitted inside the pressurised environment.

Available in a choice of two mounting styles (Internal or External), these sensors can be supplied in lengths to suit actuator strokes up to 1100mm. Extended lengths to 1600mm can also be supplied - talk to our application engineers about your requirement.

Key Features & Benefits
• Competitively priced - cost of servo systems reduced.
• Integrated with actuator design - eliminates damage to externally fitted sensors.
• Removable slider assembly - simple to install.
• Cable integrally moulded - maximum sealing and strain relief
• Rapid despatch - Eliminates customer inventory
• CE approved - Confidence in EMC performance

 
 

ICT050
Contactless In-Cylinder Linear Transducer

The ICT050 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement transducer.

With a body diameter of only 5.4mm the ICT050 is the smallest transducer package we offer, and is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium.

The ICT050 is ideal for use on small-bore actuators and offers a choice of internal or threaded flange mounting configurations (including SAE1926/2 and ISO6149/2 compatible thread forms), to suit tie-rod, welded and rear clevis-mounted cylinder types in stroke ranges from 25 to 500mm. Three core configurations also provide the designer the following options:

SLEEVED CORE - cylinder rods can be simply machined to accommodate the sleeve. This also gives the option of retro-fitting existing servo-cylinders with an upgrade to ICT technology.


THREADED CORE - provides the designer with the minimum transducer body size and simplified installation
requiring minimal machining.

FORCE FIT CORE - the core can be pressed into the cylinder rod and is retained by a tolerance ring.

With no electrical sliding contacts, the ICT050 has a working life which is almost limitless.

Signal conditioning is carried out by separate electronics packages (EICT or EICTM) which can be located up to 10 metres away from the harsh environment in which the transducer may be required to operate. Operating from 10 to 60Vdc, the electronics modules can provide a wide range of voltage output signals as well as a 4-20mA current output option or digital PWM signal. The electronics is housed in a high strength IP66 (or metal IP68) enclosure and includes user adjustment for zero and gain.

Key Features
• Working pressure to 500 Bar (7,500 psi)
• High temperature capability to +200°C (+392°F) [Order Code H]
• Low temperature capability to -55°C (-67°F) [Order Code L]
• Small transducer body length to stroke ratio
• Infinite resolution
• Absolute measurement
• Flexible mounting styles
• Rugged stainless steel construction
• CE approved
• Rapid despatch of any option

 
 

ICT080

ICT080
Contactless In-Cylinder Linear Transducer

The ICT080 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement transducer.

With a body diameter of only 8mm the ICT080 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. The ICT080 is ideal for use on small-bore actuators and offers a choice of internal or threaded flange mounting configurations to suit tie-rod, welded and rear clevis-mounted cylinder types in stroke ranges from 25 to 1000mm. Two core configurations also provide the designer the following options:

SLEEVED CORE - cylinder rods can be simply machined to accommodate the sleeve. This also gives the option of retro-fitting existing servo-cylinders with an upgrade to ICT technology.

• THREADED CORE - provides the designer with the minimum transducer body size and simplified installation
requiring minimal machining.

With no electrical sliding contacts, the ICT080 has a working life which is almost limitless.

Signal conditioning is carried out in a separate electronics package (EICT) which can be located up to 10 metres away from the harsh environment in which the transducer may be required to operate. Operating from 10 to 60Vdc, the electronics module can provide a wide range of voltage output signals as well as a 4-20mA option. The electronics is housed in a high strength IP66 enclosure and includes user adjustment for zero and gain.

Key Features
• Working pressure to 670 Bar (10,000 psi)
• High temperature capability to +200°C (+392°F) [Order Code H]
• Low temperature capability to -55°C (-67°F) [Order Code L]
• Small transducer body length to stroke ratio
• Infinite resolution
• Absolute measurement
• Choice of Linearity bands [A=0.25% max.; B=0.5% max.
• Flexible mounting styles
• Rugged stainless steel construction
• CE approved
• Rapid despatch of any option

 
 

ICT100
Contactless In-Cylinder Linear Transducer

The ICT100 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement transducer.

With a body diameter of only 10.1mm the ICT100 is ideal for installation into hydraulic and pnematic cylinder applications where space is at a premium. The ICT100 is ideal for use on medium stroke actuators and offers a choice of internal or threaded flange mounting configurations to suit tie-rod, welded and rear clevis-mounted cylinder types in stroke ranges from 25 to 2000mm. Two core configurations also provide the designer the following options:

SLEEVED CORE - cylinder rods can be simply machined to accommodate the sleeve. This also gives the option of retro-fitting existing servo-cylinders with an upgrade to ICT technology.

THREADED CORE - provides the designer with the minimum transducer body size and simplified installation requiring minimal machining.

With no electrical sliding contacts, the ICT100 has a working life which is almost limitless.

Signal conditioning is carried out in a separate electronics package (EICT) which can be located up to 10 metres away from the harsh environment in which the transducer may be required to operate. Operating from 10 to 60Vdc, the electronics module can provide a wide range of voltage output signals as well as a 4-20mA option. The electronics is housed in a high strength IP66 enclosure and includes user adjustment for zero and gain.

Key Features
• Working pressure to 670 Bar (10,000 psi)
• High temperature capability to +200°C (+392°F) [Order Code H]
• Low temperature capability to -55°C (-67°F) [Order Code L]
• Small transducer body length to stroke ratio
• Infinite resolution
• Absolute measurement
• Choice of Linearity bands [A=0.25% max.; B=0.5% max.]
• Flexible mounting styles
• Rugged stainless steel construction
• CE approved
• Rapid despatch of any option

 
 

ICT800

ICT800 - New
Contactless In-Cylinder Linear Transducer – Analog output

The ICT800 Contactless In-Cylinder Linear Transducer combines the best features associated with LVDTs and potentiometers into one rugged, contactless and highly reliable displacement transducer.

Signal conditioning is integrated into the transducer flange.

Operating from 8 - 30Vdc or 5Vdc supply, the electronics provide an analog voltage output signal of either 0.5-4.5Vdc or 0.2-4.8Vdc over the selected measurement range.

With a transducer body diameter of only 8mm the ICT800 is ideal for installation into hydraulic and pneumatic cylinder applications where space is at a premium. The ICT800 is ideal for use on small-bore actuators and offers a choice of internal or threaded external flange mounting configurations to suit tie-rod, welded and rear clevis-mounted cylinder types in stroke ranges from 25 to 1000mm. Two core configurations also provide the designer the following options:

SLEEVED CORE - cylinder rods can be simply machined to accommodate the sleeve. This also gives the option of retro-fitting existing servo-cylinders with an upgrade to ICT technology.

THREADED CORE - provides the designer with the minimum transducer body size and simplified installation requiring minimal machining.

With no electrical sliding contacts, the ICT800 has a working life which is almost limitless.

Key Features
• Measurement range 25-1000mm
• Small transducer body length to stroke ratio
• 12bit resolution
• Absolute measurement
• Working pressure to 670 Bar (10,000 psi)
• Temperature range -40 to +125°C
• Operates from 5Vdc or 8-30Vdc
• Analog output – 0.5-4.5Vdc or 0.2-4.8Vdc
• Flexible mounting styles
• Rugged stainless steel construction

 
 
Page 1 2
 
Back to Linear Position Sensors
 
 
s