Live Chat Support Software  
 
     
     
 
 
 
       
       
                     
       
 
Back to Custom Design
 
 
 
  Interface Modules
     
CDIM CDIM
Potentiometer


This electronic interface module is designed to work with potentiometer joysticks. The device is designed to regulate the power supply to buffer any Penny and Giles joystick. It has a regulated 5V supply to the joystick and has an additional 2.5V reference voltage for centre tap stabilization. Its wiper current draw is in the magnitude of
nano-amps offering very high input impedance. The device has over current, polarity and over voltage protection.

Each module can handle two analogue joystick channels; the device also provides over current protection for the directional track switches for the joystick.


Output Types:

Current output (4.20mA)
Positive Voltage (0-24V)
Positive Negative Voltage (-/+10V)
PWM (Available on request)
CAN J1939 (Available on request)
CAN Open (Available on request)
USB 2.0
   
   
Currently available units:  
   
CDIM100-1001
Joystick to 4-20mA output with 12mA at the centre position
 
   
CDIM100-1002
Joystick to 0-10VDC output with 5VDC at the centre position
 
   
CDIM100-1003
Joystick to -10VDC to +10VDC with 0VDC a the centre postion
 
   
CDIM100-1004
Joystick to Bosch Rexroth RA-2 Interface
 
   
CDIM100-1005
Joystick to Bosch Rexroth RA-2 Interface
 
 
 
 
 
CDIMH CDIMH
Hall Effect

This electronic interface module is designed to work with Hall effect joysticks. The device is designed to regulate the power supply to buffer any Penny and Giles joystick. It has a regulated 5V supply to the joystick and has an additional 2.5V reference voltage for centre tap stabilization. Its wiper current draw is in the magnitude of nano-amps offering very high input impedance. The device has over current, polarity and over voltage protection.

Each module can handle two analogue joystick channels; the device also provides over current protection for the directional track switches
for the joystick.


Output Types:

Current output (4~20mA) (Available on request)
Positive Voltage (0~24V)
Positive Negative Voltage (-/+10V) (Available on request)
PWM (Available on request)
CAN J1939 (Available on request)
CAN Open (Available on request)
USB 2.0
   
   
   
   
Currently available units:  
   
CDIMH100-1006
Joystick to 1VDc to 4VDC output with 2.5VDC at the centre position
 
 
 
Back to Custom Design