Live Chat Support Software  
 
     
     
 
 
       
   
 
 
Back to round caps products
 
 
 
  Round caps
     
 
 

1SS/1LS/1IS caps Small round cap

1SS/1LS/1IS
Small round cap

1SS/1LS/1IS cap series provides flexibility in colour as well as in height. Illumination can either be full (1IS) or dot (1LS). The illuminated caps are mounted on Multimec 5G switch, solid colour caps can be mounted on both 5 series switches.

Measurements: 
Ø6,5mm 
Height with 5E+1SS: 8,0-22,5mm 
Height with 5G+1IS: 10,4-22,5mm 
Height with 5G+1LS: 12,0-22,5mm

Standard colours: 
1SS solid colours: blue, green, grey, yellow, white, red and black 
1IS transparent colours: transparent and frosted white 
1LS solid colours: blue, grey, red and black 
1LS lens colours: transparent, green, yellow, frosted white and red 

Temperature range: 
1SS solid cap: -40/+160oC 
1IS transparent cap: -40/+85oC 
1LS solid cap: -40/+65oC 

 
 

1JS cap Low round cap for foil overlay 1JS
Low round cap for foil overlay


1JS cap series is just 10.4 mm high with the Multimec 5G switch making it the lowest illuminated cap in MEC product range. the 1JS is Ø9,6mm. The cap is excellent for foil overlay. It was designed with soft edges in order to extend the lifetime of the foil.

Standard colours: 

1JS solid colours: blue, green, grey, yellow, white, red and black 
1JS transparent colours: transparent and frosted white 

Temperature range: 
Solid cap: -40/+65oC 
Transparent cap: -40/+85oC

Cap 1JS is mounted on Multimec 5G series switches. 

 

1DS/1ES/1FS caps Ø9.6 mm round cap

1DS/1ES/1FS
Ø9.6 mm round cap


1DS/1ES/1FS cap series consists of round caps with Ø9,6 mm and overall height with the 5G switch is 14,9mm. 1DS can be provided in solid as well as transparent colour for illumination. 1ES is a cap in solid colour with a small round lens and 1FS is also a cap in solid colour but has a large round lens on the top.

tandard colours: 

1DS solid colours: blue, green, grey, yellow, white, red and black 
1DS transparent colours: transparent and frosted white 
1ES/1FS solid colours: blue, grey, red and black 
1ES/1FS lens colours: transparent, green, yellow, frosted white and red 

Temperature range: 
Solid cap: -40/+65oC 
Transparent cap: -40/+85oC 
Lens: -40/+85oC 

1DS has also a possibility of legends. Printing can be done for solid caps as well as reverse printing for transparent caps. 

Caps 1DS/1ES/1FS are mounted on Multimec 5G series switches. 

 

1ZCS cap Ø14,3mm cap with a rounded top 1ZCS
Ø14,3mm cap with a rounded top


1ZCS cap provides excellent feeling with its rounded top. The cap series can be used as a stand-alone product or with the 1ZB cap for Navimec solution. 1ZCS cap is Ø14,3mm and the overall height with 5G switch is 11,7mm.


Standard colours: 
1ZCS solid colours: green, grey, white, red, black, ultra blue, dusty blue, aqua blue, metal dark blue, metal light grey, metal dark grey and metal bordeaux 
1ZCS transparent colours: frosted white 

Temperature range
Solid cap: -40/+65oC 
Transparent cap: -40/+85oC 

1ZCS has also a possibility of legends. Printing can be done for black caps in white legends as well as reverse printing on a frosted white cap with either black soft touch paint and laser marking or black tampon print. 

Cap 1ZCS is mounted on Multimec 5G series switches


 
aquamec Round waterproof cap aquamec
Round waterproof cap

Aquamec is a switch solution that has IP67 from the front panel. Cap is supplied either in black or transparent colour. The series is based on the Multimec 3F series and can provide excellent illumination with the transparent cap.

Specifications Sealing Boot: 
  • Operating temperature: -40/+85oC
  • IP67 sealing
  • Sealing lifetime: 2.000.000 operations
  • Material: silicone
Cap can be either black or transparent
The overall height with the 3F switch is 24,2-27,2mm 
     
varimec Round variable height caps varimec
Round variable height caps

Varimec offers an utmost flexibility within cap size, colour height and shape.

arimec offers 2400 options within its series.
  • Shape: round 
  • Size: ø5.2 mm, ø7.8 mm, ø11.6 mm
  • Colours: blue, grey, yellow, red, black
  • Overall height: 10.4 - 22.5 mm
  • Height above recess: 2.4 - 6.4 mm
Temperature range: -40/+160oC 

Varimec has a cap retention system  where the cap is pressed into the hole in switch body. The series is mounted on Multimec 3E switch
 
1GAS/1GCS caps Flat round caps for foil overlay 1GAS/1GCS
Flat round caps for foil overlay

1GAS/1GCS caps are flat round caps designed for foil overlay. 1GAS is Ø11mm and 1GCS is Ø15mm.

1GAS/1GCS is often used in applications with foil overlay. 

Standard colour: 
1GAS/1GCScap solid colours: blue, green, grey, yellow, white, red, black 
1GAS/1GCS cap transparent colours: frosted white

Temperature range
Solid cap: -40/+65oC 
Transparent cap: -40/+85oC

The 1GAS/1GCS cap series is mounted on Multimec 5G switch.

 
1US cap Round cap with a rounded top 1US
Round cap with a rounded top

1US is a soft line cap with great illumination possibility. The cap has a rounded top that provides good tactile feel to the operator.

The cap has a rounded top that provides good tactile feel to the operator. 

Measurements: Ø10,5 mm 

Standard colours: blue, grey, frosted white, red and black

Temperature range
Solid colour: -40/+65o 
Transparent colour: -40/+85oC

1US cap series is mounted on Multimec 5G series switches

 
1US cap Round cap with a rounded top 10R/10RF/10RM
ø30mm round cap for Multimec 5G

The cap series is designed to be flush with the front plate to give a neat and aesthetic look.

The cap series provides many options regarding illumination. As LEDs need to be placed on the PCB to have an even illumination, it is easy to customise your design.

There is full illumination with frosted white 10R and 10RF caps, and legend illumination with either reverse-printed 10R and 10RF or metal legend on 10RM.

 

The 10R/10RF/10RM series:

  • ø30mm
  • 10R - slightly rounded top
  • 10RF - flat top with slightly sharper edges
  • 10RM - flat top with a metal plate (for legend) that leaves a 1mm rim.

Standard solid cap colours: blue, green, grey, yellow, white, red and black

Standard transparent colour: frosted white 

Optional parts:

  • Spacer 10RY - improves activation and sealing functionality (necessity dependent on front panel thickness and design considerations)
  • Sealing is only necessary when front panel sealing (to IP67) is required


 
 
 
  Back to round caps products