Live Chat Support Software  
 
     
     
 
 
       
   
 
 
Back to Multimec 3 series products
 
 
 
  Multimec 3 series
       
 
 

Multimec 3FSH9 Momentary high temperature SMD tact switch

Multimec 3FSH9
Momentary high temperature SMD tact switch

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. In addition, it has a right angle version also with an LED. 3FSH9 is a surface mount switch with high temperature housing.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 
 
 
 

Multimec 3FTH9 High temperature through-hole tact switch

Multimec 3FTH9
High temperature through-hole tact switch

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 3FTH9 is a through-hole high temperature switch.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 

 
 

Multimec 3FTL6 Low temperature through-hole tact switch

Multimec 3FTL6
Low temperature through-hole tact switch

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. In addition, it has a right angle version also with an LED. Switch 3FTL6 has low temperature housing and through-hole terminals.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• quiet version also available
• temperature range: -40/+115oC
• through-hole right angle version

Multimec 3F series can be provided with an LED: LED colours: blue, green, yellow, white, red, green/yellow, red/green and red/yellow. 

 
 

Multimec 3ESH9 High temperature SMD tact switch for variable height caps

Multimec 3ESH9
High temperature SMD tact switch for variable height caps

3E switch is a switch where actuator is mounted into the hole in the switch body.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting varimec caps. There are 2400 options in the varimec range
 
 

Multimec 3ETH9 High temperature TH tact switch for variable height caps

Multimec 3ETH9
High temperature TH tact switch for variable height caps

3E switch is a switch where actuator is mounted into the hole in the switch body.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting varimec caps. There are 2400 options in the varimec range. 

   
   
 
 
Multimec 3ETL6 Low temperature TH tact switch for variable height caps Multimec 3ETL6
Low temperature TH tact switch for variable height caps


3E switch is a switch where actuator is mounted into the hole in the switch body. The switch is used to mount Varimec caps. 3ETL6 is a low temperature through-hole switch.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+115oC
• through-hole right angle version

Multimec 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting varimec caps. There are 2400 options in the varimec range. 
 
 
Multimec 3CSH9 High temperature surface mount tact switch

Multimec 3CSH9
High temperature surface mount tact switch

Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-mould solutions. In addition the switch is great for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. 3CSH9 is a high temperature surface mount switch.

• surface mount 
50mA/24VDC
single pole
momentary
10.000.000 operations lifetime
sealed to IP67
3.5N actuation force
temperature range: -40/+160oC

Multimec 3C series has the actuator extended out of the switch body. 
The switch series is excellent for build-in, over-mould as well as under foil solutions because it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. 
 
 
Multimec 3CTH9 High temperature through-hole tact switch Multimec 3CTH9
High temperature through-hole tact switch


Multimec 5GTH920 switch has a 2.0N actuation force and an actuator levelled with the switch body. It´s a through-hole high temperature switch with a crisp tactile feeling though a quiet version is also available.

• through-hole 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3C series has the actuator extended out of the switch body. 
The switch series is excellent for build-in, over-mould as well as under foil solutions because it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. 

 
 
Multimec 3CTL6 Low temperature through-hole tact switch

Multimec 3CTL6
Low temperature through-hole tact switch

Simplicity and reliability makes the multimec 3C an excellent switch for build-in and over-mould solutions. In addition the switch is great for foil overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+115oC
• through-hole right angle version

Multimec 3C series has the actuator extended out of the switch body. 
The switch series is excellent for build-in, over-mould as well as under foil solutions because it can still function even if the overlay breaks and an upgrade can be done by changing the foil and not the PCB, which is very cost-effective. 
     
 
Multimec 3ASH9 High temperature SMD tact switch with a levelled actuator

Multimec 3ASH9
High temperature SMD tact switch with a levelled actuator


Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch. 3ASH9 is a high temperature surface mount switch.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3A series has an actuator levelled with the switch body. 
Possible caps: 1A/1H/1M/1ZA; 1B/1C+2C/2D; 1ZB 
 
 
Multimec 3ATH9 High temperature TH tact switch with a levelled actuator

Multimec 3ATH9
High temperature TH tact switch with a levelled actuator


Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch. 3ATH9 is a high temperature through-hole switch.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3A series can supplied with an LED. LED colours: blue, green, yellow and red. 

Multimec 3A series has an actuator levelled with the switch body. 
 
 
Multimec 3ATL6  Low temperature TH tact switch with a levelled actuator

Multimec 3ATL6
Low temperature TH tact switch with a levelled actuator


Multimec 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. There is also an illumination option with LED mounted on the switch. 3ATL6 is a low temperature through-hole switch.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• quiet version also available
• temperature range: -40/+115oC
• through-hole right angle version

Multimec 3A series can supplied with an LED. LED colours: blue, green, yellow and red. 

Multimec 3A series has an actuator levelled with the switch body. 
 
 
Back to Multimec 3 series products