Live Chat Support Software  
 
     
     
 
 
       
   
 
 
Back to high performance tactile switches products
 
 
 
  High Performance Tactile Switches
     
 
 

Multimec 5GTH935  3.5N through-hole tact switch

Multimec 5GTH935
3.5N through-hole tact switch

Multimec 5GTH935 switch has a 3.5N actuation force and an actuator levelled with the switch body. It´s a through-hole high temperature switch with a crisp tactile feeling.

• through-hole 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC
• through-hole right angle version 

Multimec 5G series is a new generation switch of the 3 and 4 series switches. Multimec 5 series matches 3 and 4 series´ dimensions and print layout with an exception of illuminated 3 series. 5G switch has a large diameter snap-on cap retention system and anactuator levelled with the switch body. 5GTH935 has 3.5N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  The switch can be supplied with one or two LEDs integrated in it in order to provideexcellent illumination

LED colours, single: blue, green, yellow, white, red; bi-colour: green/yellow, red/green and red/yellow. 

In addition, right angle version is available for non-illuminated version switch only.

LED colours: blue, green, yellow, white, red, green/yellow, red/green and red/yellow. 

   
   
   
 
 

Multimec 5ETH935  3.5N through hole tact switch Multimec 5ETH935
3.5N through hole tact switch


Multimec 5ETH935 switch has a 3.5N actuation force and a small diameter snap-on cap retention system. It´s a through-hole high temperature switch with a crisp tactile feeling.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC
• through-hole right angle version

Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5ETH935 has3.5N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  In addition, there is a right angle version available.  
 
 

Multimec 5GSH920 2.0N surface mount tact switch

Multimec 5GSH920
2.0N surface mount tact switch


Multimec 5GSH920 switch has a 2.0N actuation force and an actuator levelled with the switch body. It´s a surface mount high temperature switch with a crisp tactile feeling though a quiet version is also available.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 2.0N actuation force
• quiet version available 
• temperature range: -40/+160oC

Multimec 5G series is a new generation switch of the 3 and 4 series switches. Multimec 5 series matches 3 and 4 series´ dimensions and print layout with an exception of illuminated 3 series. 5G switch has a large diameter snap-on cap retention system and anactuator levelled with the switch body. 5GSH920 has 2.0N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  In addition, the switch can be supplied with one or two LEDs integrated in it in order to provide excellent illumination

LED colours, single: blue, green, yellow, white, red; bi-colour: green/yellow, red/green and red/yellow.

 
 

Multimec 5GTH920 2.0N through-hole tact switch Multimec 5GTH920
2.0N through-hole tact switch


Multimec 5GTH920 switch has a 2.0N actuation force and an actuator levelled with the switch body. It´s a through-hole high temperature switch with a crisp tactile feeling though a quiet version is also available.

• through-hole 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 2.0N actuation force
• quiet version available 
• temperature range: -40/+160oC
• through-hole right angle version 

Multimec 5G series is a new generation switch of the 3 and 4 series switches. Multimec 5 series matches 3 and 4 series´ dimensions and print layout with an exception of illuminated 3 series. 5G switch has a large diameter snap-on cap retention system and anactuator levelled with the switch body. 5GTH920 has 2.0N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  The switch can be supplied with one or two LEDs integrated in it in order to provideexcellent illumination

LED colours, single: blue, green, yellow, white, red; bi-colour: green/yellow, red/green and red/yellow. 

In addition, right angle version is available for non-illuminated version switch only. 

 
 

Multimec 5ESH965 6.5N surface mount tact switch

Multimec 5ESH965
6.5N surface mount tact switch

Multimec 5ESH965 switch has a 6.5N actuation force and a small diameter snap-on cap retention system. It´s a surface mount high temperature switch with a crisp tactile feeling.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 6.5N actuation force
• temperature range: -40/+160oC

Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5ESH965 has6.5N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.

 
 

Multimec 5GTH965 6.5N through-hole tact switch

Multimec 5GTH965
6.5N through-hole tact switch


Multimec 5GTH965 switch has a 6.5N actuation force and an actuator levelled with the switch body. It´s a through-hole high temperature switch with a crisp tactile feeling.

• through-hole 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 6.5N actuation force
• temperature range: -40/+160oC
• through-hole right angle version

Multimec 5G series is a new generation switch of the 3 and 4 series switches. Multimec 5 series matches 3 and 4 series´ dimensions and print layout with an exception of illuminated 3 series. 5G switch has a large diameter snap-on cap retention system and anactuator levelled with the switch body. 5GTH965 has 6.5N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  The switch can be supplied with one or two LEDs integrated in it in order to provideexcellent illumination

LED colours, single: blue, green, yellow, white, red; bi-colour: green/yellow, red/green and red/yellow. 
 
 

Multimec 5ESH920  2.0N surface mount tact switch

Multimec 5ESH920
2.0N surface mount tact switch


Multimec 5ESH920 switch has a 2.0N actuation force and a small diameter snap-on cap retention system. It´s a surface mount high temperature switch with a crisp tactile feeling though a quiet version is also available.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 2.0N actuation force
• quiet version available
• temperature range: -40/+160oC

Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5ESH920 has2.0N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.
 
 
Multimec 5ETH965 6.5N through-hole tact switch

Multimec 5ETH965
6.5N through-hole tact switch


Multimec 5ESH920 switch has a 2.0N actuation force and a small diameter snap-on cap retention system. It´s a surface mount high temperature switch with a crisp tactile feeling. The switch is multifunctional and has three functions: normally closed (NC), normally open (NO) and normally closed/normally open(NC/NO).

• hrough-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 6.5N actuation force
• temperature range: -40/+160oC
• through-hole right angle version

Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5ETH965 has6.5N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  In addition, there is a right angle version available. 
 
 
Multimec 5ETH920 2.0N through-hole tact switch

Multimec 5ETH920
2.0N through-hole tact switch


Multimec 5ETH920 switch has a 2.0N actuation force and a small diameter snap-on cap retention system. It´s a through-hole high temperature switch with a crisp tactile feeling though a quiet version is also available.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 2.0N actuation force
• quiet version available
• temperature range: -40/+160°C
• through-hole right angle version

Multimec 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5ETH920 has2.0N actuation force and is only available in high temperature material in order to stand today´s advanced soldering processes.  In addition, there is a right angle version available

 
 
Multimec illuminated through-hole tact switch

Multimec 4FTH9
Illuminated through-hole tact switch


Illumec 4F series is a high temperature switch designed to provide excellent illumination.

through-hole
50mA/24VDC
single pole
momentary
10.000.000 operations lifetime
switch sealed to IP 67
3.5N actuation force
switch temperature range: -40/+160⁰C
LED temperature range: -30/+85oC

Illumec 4F series is a special illuminated switch with the same slide-on cap retention system as Multimec 3F series. This product range is being replaced by Multimec 5G switch which can provide an excellent illuminations as well. 
 
 
Multimec 4FSH9 illuminated surface mount tact switch

Multimec 4FSH9
Illuminated surface mount tact switch

Illumec 4F series is a surface-mount illumination switch.

• Surface mount 
• 50mA/24VDC 
• single pole 
• momentary 
• 10.000.000 operations lifetime 
• sealed to IP67 
• 3.5N actuation force 
• temperature range: -40/+160oC 
• LED temperature range : -40/+85°C 

4F series is a special illuminated switch with the same slide-on cap retention system as 3F series. This product range is being replaced by 5G switch which can provide an excellent illumination as well. 

     
 
Multimec 3FSH9 Momentary high temperature SMD tact switch

Multimec 3FSH9
Momentary high temperature SMD tact switch

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. In addition, it has a right angle version also with an LED. 3FSH9 is a surface mount switch with high temperature housing.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 
 
 
Multimec 3FTH9 High temperature through-hole tact switch

Multimec 3FTH9
High temperature through-hole tact switch

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 3FTH9 is a through-hole high temperature switch.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. 

 
 
Multimec 3FTL6 Low temperature through-hole tact switch

Multimec 3FTL6
Low temperature through-hole tact switch

Multimec 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. In addition, it has a right angle version also with an LED. Switch 3FTL6 has low temperature housing and through-hole terminals.

• through-hole
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• quiet version also available
• temperature range: -40/+115oC
• through-hole right angle version

Multimec 3F series can be provided with an LED: LED colours: blue, green, yellow, white, red, green/yellow, red/green and red/yellow. 

 
 
Multimec 3ESH9 High temperature SMD tact switch for variable height caps

Multimec 3ESH9
High temperature SMD tact switch for variable height caps

3E switch is a switch where actuator is mounted into the hole in the switch body.

• surface mount 
• 50mA/24VDC
• single pole
• momentary
• 10.000.000 operations lifetime
• sealed to IP67
• 3.5N actuation force
• temperature range: -40/+160oC

Multimec 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting varimec caps. There are 2400 options in the varimec range
 
 
prev13next
 
  Back to high performance tactile switches products